Part #: 200PH-5
Description: 2" Poly Pump With 5.5 HP Honda® Engine
Standard Lead Times
Specifications
Family: |
Pumps |
Type: |
Polypropylene Pumps |
Style: |
Gas Engine & Pump |
Size: |
2" |
Weight |
54.591 lbs |
Features & Benefits
- Breather through air cleaner.
- Cast iron cylinder sleeve.
- CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITHFLAMMABLE LIQUIDS.
- Corrosion resistant.
- EPDM Standard, FKM ­:available.
- Heavy duty flywheel.
- High oil fill
- Lightweight.
- Low maintenance.
- MOTOR
- NOTE: Engine warranty service available at authorized BRIGGS &: Stratton®: and Honda®: dealers.
- OilGuard®: low oil sensor.
- Overhead valve.
- Precision molded construction.
- PUMP
- Superior design.
Kits & Replacements Parts
Item |
Description |
Part Number |
Qty Per |
2 |
Poly Pump Rear Bracket |
12703A |
1 |
3 |
Check Valve |
12705 |
1 |
1 |
Poly Pump Volute |
12702A |
1 |
5 |
2" Poly Pump Body |
12712A |
1 |
6 |
5/16-24 X 1¾" HHCS, 18-8 Stainless Steel |
12715A |
4 |
7 |
Slinger For 5.5 & 6.5 HP Engine |
12716 |
1 |
8 |
O-Ring For Screw Head -EPDM |
12717 |
4 |
4 |
O-Ring (Seal Assembly) EPDM |
12710 |
1 |
9 |
EPDM Pump Body O-Ring 2-375 |
12719A |
1 |
10 |
Body Screw |
12720 |
10 |
12 |
EPDM Seal Poly Pump Boxed |
12713 |
1 |
14 |
5/16"-24 X 1.12" HFS, 316 Stainless Steel |
12765A |
1 |
13 |
O-Ring Segment |
12754 |
1 |
16 |
Impeller Bolt Gasket-FKM |
12774VA |
1 |
18 |
#10 X 1 ½" PPH Sms 18-8 Stainless Steel |
12900 |
1 |
17 |
7/16-14 Hex Nut ⅝" 316 Stainless Steel |
12775A |
1 |
11 |
#6 X ½" Pph SMS, 18-8 SS |
12725 |
2 |
19 |
5/16" Flat Washer, 316 Stainless Steel |
12901 |
4 |
21 |
¼" Stainless Steel Lockwasher |
V07018 |
10 |
20 |
3/16 X 3/16 X 5/8 Impeller Key |
12902A |
1 |
22 |
¼" Stainless Steel Nut |
V07019 |
10 |
Literature & Technical Documents
Videos