Part #: 222PIE5

Description: 2" Cast Iron Pump Wth 5.0 HP Three Phase Electric Motor

Standard Lead Times

Specifications

Features & Benefits

"V" shaped for quicker priming.
Ball bearings, locked drive end bearing.
Carbon ceramic seal with stainless steel cup and spring with FKM rubber.
Cast iron construction for rugged dependable service.
CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump. No Flammables.
DO NOT USE WITH FLAMMABLE LIQUIDS.
Dynamically balanced impeller.
Heavy duty slinger seal on motor shaft.
Heavy gauge steel frame.
Large weep holes between pump end and engine.
Motors wound with inverter spike resistance magnet wire.
Mounted complete on heavy duty cast iron base plate.
Pressure cast aluminum end plates with ribbed design for rigidity.
Pump end separated from engine.
Replaceable inlet and outlet flanges.
Stainless steel shaft sleeve to protect engine shaft.

Kits & Replacements Parts

Item	Description	Part Number	Qty Per
2	Cast Iron Rear Bracket	15703	1
1	Cast Iron Pump Housing Assembly	15712	1
3	Check Valve	12705	1
4	Volute For Cast Iron Pump	15702	1
6	O-Ring (Seal Assembly) EPDM	12710	1
5	Cast Iron Impeller	15772	1
8	O-Ring For Screw Head -EPDM	12717	4
7	5/16-24 X 1¾" HHCS, 18-8 Stainless Steel	12715A	9
9	EPDM Pump Body O-Ring 2-375	12719A	1
10	FKM Seal Assembly-Boxed	12713V	1
12	Impeller Bolt Gasket-FKM	12774VA	1
11	5/16"-24 X 1.12" HFS, 316 Stainless Steel	12765A	1
13	5/16" Flat Washer, 316 Stainless Steel	12901	4
15	3" Poly Pump Drain/Prime Plug	13777	2
16	EPDM O-Ring ¾" Prime/Drain Plug	13778	2
14	3/16 X 3/16 X 5/8 Impeller Key	12902A	1
20	1/2-13 UNC 2B Hex Nut, 18-8SS	17010	1
17	Rear Bracket Shim-15000 Series	15751	1
19	1½" - 2" Pump Handle	15022	1
18	5/16" Stainless Steel Lock Washer	V10118	9
26	-16 UNC-2A X 1.25 HHCS 304 Stainless Steel	17704	8
22	2" Pump C-Faced Adapter Base Plate	17701	1
23	56C Adapter For Poly Pumps-Unassembled	12046	1
25	⅜"Stainless Steel Lock Washer	V20018	8